A Sawyer company - serving Santa Clarita, CA
An open living room and dining area after a whole-home remodel

Boral Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Clarita
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Boral Roofing: The Santa Clarita Owner’s Guide

Boral roof replacement in Santa Clarita typically runs $8,000 – $20,000 installed, depending on pitch, square footage, and whether the underlayment needs replacement. Most Boral failures we see start as a single cracked tile or a slipped ridge cap, then spread into decking damage during Santa Clarita’s dry heat and winter wind events. If you’ve spotted cracked concrete tiles, granules piling at gutter corners, or a leak that only shows up after big storms, you’re in the right place. We stock Boral-compatible parts on our trucks and install them the same week.

Contractor using a level and tape measure for building measurements nationwide

Call (661) 592-1977

Boral roofing is a specific product line, not a generic term for any concrete tile. Homeowners call us after googling “Boral roofing parts Santa Clarita” because a broken tile or cap is sitting in the yard and they don’t know what it pairs with. We do. We’re an independent installer and repair shop, not a Boral-owned operation, which means we match and install Boral products without the corporate runaround.

Which Boral Models This Applies To

A remodeled living room with built-in shelves around the fireplace

Boral’s concrete and clay roof tile lines cover several series that show up on homes across Santa Clarita, from Valencia tract builds to custom jobs off Sand Canyon Road. The main concrete profiles we work on are the Standard Weight Slate, Lightweight Cape Cod, and Mission barrel tile. We also handle Boral clay profiles including the One-Piece S and Two-Piece Mission cap-and-pan systems. If you don’t know which one you have, check the underside of a loose tile. Boral stamps the profile name and plant code into the back of most tiles made after 2000. Older Boral products may only show a color code with no profile name.

Here’s the compatibility part that trips up a lot of homeowners: Boral barrel tile is not universal. Mission, S-tile, and cap-and-pan have different water channel geometry and different batten spacing. A tile from one profile won’t seat correctly on a different profile, even if the length and width look close. We also flag this for Santa Clarita specifically: Boral’s lightweight concrete profiles hold up better in heat than older heavy clay tiles that expand and contract more through our 100°F summer days. If you have Boral clay, we keep matching stock. But after loss due to breakage, some homeowners in Stevenson Ranch and Castaic switch to the Boral lightweight concrete equivalent to reduce future breakage and cut weight on the trusses.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Boral Roofing Is Failing

  • Cracked or spalled concrete tiles after a dry, hot stretch. Boral tiles can handle heat, but micro-cracks widen during Santa Clarita’s temperature swings. When water gets into a crack and the overnight temperature drops, the freeze-thaw cycle splits the tile the rest of the way.
  • Tile grit collecting in gutters or at downspout elbows. Boral concrete surface erosion is normal, but if you’re sweeping up a heavy pile after every wind season, the tiles are losing their protective layer faster than they should. That exposes the softer core and accelerates cracking.
  • Ridge caps shifted or cracked at the peak. Ridge caps fail first on most Boral roofs because they are nailed and mortared in place, then take the brunt of Santa Clarita’s wind gusts through Newhall Pass. A cracked ridge cap lets water run under the tile field and onto the decking, far from where the leak shows up on the ceiling.
  • Dark stains on the underside of roof sheathing in the attic. By the time you see a ceiling stain, water has been moving through the decking for a while. Boral tile works as a water-shedding system, not a waterproof layer. The underlayment below the tile is the real water barrier, and when it degrades, tile repair alone won’t stop the leak.
  • Broken tiles near roof penetrations like vents, skylights, or satellite mounts. The flashings around those penetrations are usually the original ones from the day the roof went in. When they fail, they allow water to run sideways into the tile field, which eventually damages the tiles around the penetration.

If any of these sound familiar, the first step is an attic inspection to see if the decking is still sound. That’s what we do before writing any quote. You don’t want to spend money replacing tiles over rotted sheathing.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A whole-home remodel with the living, dining and kitchen areas opened up

In Santa Clarita, a Boral roof replacement runs $8,000 – $20,000 installed for a typical 1,500 to 3,000 sq. ft. home. Roof repair on a Boral system falls into the $400 – $1,800 range, and tile-specific repair work is $600 – $2,500 depending on the number of tiles, ridge caps, and underlayment patches needed. The spread is driven by four things: roof pitch, access, whether the underlayment needs full replacement, and which Boral profile you have. Lightweight Cape Cod tiles install faster than Mission barrel, and that difference shows up in labor.

Every Boral repair or replacement we quote includes labor, the Boral-compatible tile or cap, matching mortar and fasteners, debris hauling, and the underlayment work if needed. We give you a written line-item price before work starts. The number you sign off on is the number you pay. Our workmanship on Boral roofing is backed by our 365-Day Done Right Promise in writing. If something’s not right, we come back and make it right, no charge.

DIY or Call Us?

Here’s the honest split. You can safely inspect your own Boral roof from the ground or from a ladder placed on solid ground. Look for visible cracks, shifted ridges, and bare spots. Do not walk a Boral tile roof unless you know exactly how to step on the tile shoulders, and do not attempt to pull and reset tiles on a steep pitch. Concrete tile is heavy, edges get brittle with age, and one cracked tile can send you sliding. We’ve seen more than a few homeowners turn a $500 tile repair into a hospital bill and a tarped roof. High-temperature mortar work at the ridge is the same story: it looks simple from the video, but the bond fails if the mix, humidity, and cure time aren’t right.

For a broken tile, if the underlayment is intact and you have the exact matching Boral profile, a careful patch is possible on a low-pitch roof with proper fall protection. That’s your call. But if you want the match verified and the repair guaranteed, call (661) 592-1977. We’ll come out, confirm the Boral profile, and give you a written price for the repair. Luca Romano has been at this long enough to know the work tells the story. We just show up and do it right.

FAQs

A remodeled family room with new windows and a window seat

Getting started with Sawyer in Santa Clarita

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Santa Clarita team

A local crew that works across Santa Clarita and the towns around it, to the same written standard as every Sawyer location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Santa Clarita? Licensed & insured · Free written quotes response · free estimates
Call (661) 592-1977
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Sawyer Remodel Santa Clarita responds fast. No obligation.

By requesting your free estimate, you agree to our Privacy Policy and authorize us to contact you through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch