Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Santa Clarita Owner’s Guide
Boral fence installation in Santa Clarita typically runs $3,500 to $9,000 for a full panel replacement, and we stock Boral-compatible sections on our trucks for same-week installs in most neighborhoods from Valencia to Canyon Country. Most homeowners call us after a Santa Ana wind event snaps a post at the base or a sprinkler has been soaking the bottom rail for years. The failure almost always starts at the post-to-panel connection, not the panel itself.
Which Boral Models This Applies To
Boral manufactures fence panels under two main lines that show up in Santa Clarita backyards: the standard 6-foot privacy panel and the 4-foot picket style, both using a composite substrate with a molded wood-grain face. The compatibility gotcha we see constantly is that Boral changed the post sleeve dimensions around 2018, so a panel from a 2015 build will not drop cleanly onto a newer post without shimming or replacing the sleeve. You can identify your series by checking the back face of any panel for a stamped mold number, usually a four-digit code starting with 3 or 5. We carry OEM Boral sections plus a quality aftermarket equivalent that matches the texture and color fade profile, and we will always tell you which one we are quoting. Sawyer Remodel Santa Clarita is an independent installer; we are not a Boral factory outlet, which means we stock what actually fails in this valley, not what a catalog says you should buy.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Lean at the post base. The post has rotted or cracked below grade, usually from irrigation overspray. Composite panels will not save a wood post that stays wet six months a year in Santa Clarita clay soil.
- Panel sag between posts. The aluminum stiffener inside the bottom rail has corroded and lost its bite. This happens faster in Canyon Country where soil salts work up into the rail channel.
- White chalky residue on the panels. Oxidation from hard sun exposure. It is cosmetic at first, but once the surface gets powdery, water is getting into the substrate and freeze-thaw will start splitting the edges in January.
- Rattling or flapping in wind. The screw bosses inside the panel have stripped, usually from the original installer using the wrong fastener length. A 3-inch screw where a 1-5/8 belonged will blow out the boss in one wind season.
- Color mismatch on one section. Someone replaced a panel with a different dye lot. Boral batches shift slightly, and a panel from a different year will announce itself in direct sun within six months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Our installed Boral fence replacement in Santa Clarita runs $3,500 to $9,000 depending on linear footage, post condition, and whether we are reusing existing post sleeves or setting new posts. The low end covers a single failed section with matching panel and hardware; the high end is a full perimeter rebuild with new posts set in concrete, typically 100 to 150 linear feet on a standard Santa Clarita lot. Every quote is a written line-item price before we start: panel cost, post cost, concrete, disposal, labor. You approve the number, and that is the number you pay. The work carries our 365-Day Done Right Promise, so if a post shifts or a panel backs out within a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely measure your existing panel height, check the post spacing, and snap a photo of the mold number on the back face. That tells us most of what we need for a first quote. What you should not do is dig out a failed post next to a gas line or try to horse a 70-pound composite panel back onto stripped bosses while standing on a ladder in wind. Composite panels do not flex like wood; when they bind, they bind. Call us at (661) 592-1977 with the measurements and the mold code, and we will bring the right section the first trip.
FAQs
The panels themselves will last 20 to 25 years in our sun, but the posts underneath them typically fail in 12 to 15, which is why our installs use treated posts set in concrete with a gravel base for drainage. The panel is rarely what fails; the post is. Call (661) 592-1977 and we will tell you if your posts are worth saving.
Only if the crack is at an edge and the internal aluminum stiffener is intact, which we can confirm on site in about ten minutes. Center-cracked panels or panels with stripped screw bosses are not worth patching; the substrate will keep splitting once water is inside. Call (661) 592-1977 for a straight answer, not a sales pitch.
A single section replacement takes one to two hours including haul-away. A full perimeter rebuild is a two-day job for a standard Santa Clarita lot, and we will tell you which one you need before we start. Call (661) 592-1977 for a written quote.
We stock the most common Santa Clarita sizes in our local warehouse: 6-foot privacy sections, 4-foot picket sections, matching post sleeves, and the correct Boral-specific fasteners. Odd sizes or discontinued series get ordered and arrive within a week. Call (661) 592-1977 and we will check the shelf while you are on the phone.
If you have a Boral fence section that is sagging, splitting, or leaning, get a written price before you touch anything. Call (661) 592-1977 for a free estimate. We will tell you what failed, what it costs, and when we can show up. The work tells the story. We just show up and do it right.
Written by Luca Romano, Owner, Sawyer Remodel Santa Clarita at Sawyer Remodel Santa Clarita, serving Santa Clarita and nearby areas.
