







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Fence Installation: The Santa Clarita Owner’s Guide
Dvele fence installation in Santa Clarita typically runs $3,500 – $9,000 for a full replacement, with most jobs completed in 2 to 4 days depending on linear footage and site prep. We stock Dvele-compatible fence panels and posts, match the original system, and install with a written price before any work starts. Most owners discover the problem the hard way: a fence section leaning after a Santa Clarita wind event, a post wobbling at the base, or a gate that suddenly drags against the concrete. You’re not looking for a generic fence company. You’re looking for someone who knows Dvele’s panel dimensions and post spacing so the replacement blends with what’s already standing.

We’re Sawyer Remodel Santa Clarita, an independent general contractor serving Santa Clarita and nearby areas. We’re not affiliated with Dvele, but we’ve rebuilt and installed enough Dvele fence systems across Valencia, Saugus, Canyon Country, and Newhall to know exactly how they go together, what fails first, and what it costs to make it right.
Which Dvele Models This Applies To

Dvele homes in Santa Clarita are built in clusters, and the fence systems vary by community and build year. The most common setups we see are the Dvele horizontal slat fence with aluminum posts and the Dvele privacy screen panels used along property lines and courtyard edges. The horizontal slat system uses 6-foot modular panels with a specific tongue-and-groove profile, so a generic big-box fence board won’t seat correctly. Posts are typically 2.5-inch square aluminum with a powder-coat finish matched to the exterior trim color.
To identify your exact system, look for a small Dvele build plate or spec sticker on the inside of a corner post or on the back of the gate. If the sticker is gone, measure the panel width: Dvele fence panels are almost always 72 inches wide, not the 8-foot width most fence suppliers stock. That alone eliminates half the parts you’ll find at a lumberyard. For the OEM-vs-aftermarket decision, we stock both. On newer Dvele builds still under some form of builder warranty, we recommend OEM-spec panels to keep the system consistent. On older installs where the finish has faded, a quality aftermarket panel with a close powder-coat match often saves $800 – $1,500 without anyone noticing. We’ll show you both options in writing before you choose.
Styles & brands we work with






Signs Your Dvele Fence Installation Is Failing
- Panels pulling away from the post channels. Dvele’s horizontal slat panels ride in extruded aluminum channels. When the channel clips fail or corrode, panels start slipping out, especially on west-facing runs in Santa Clarita where afternoon sun beats on the metal. This is a channel replacement, not a full fence replacement, and it’s usually fixable in a day.
- Post wobble at the base. Santa Clarita’s clay-heavy soil expands and contracts with moisture, and posts set in shallow concrete footings loosen over time. You’ll see the post rock when you push on it. The fix is re-setting the post with a deeper footer, not adding more bolts at the top.
- Gate dragging or binding. Dvele gates are heavy, and the hinge hardware has a service life in direct sun and wind. When a gate drags, it’s usually a sagging hinge pair or a worn closer. Ignoring it puts stress on the post and the panel joints.
- Powder-coat bubbling or flaking. Santa Clarita’s hot, dry summers plus the occasional hard-water sprinkler overspray will lift powder coat from the bottom rail first. Once the coating fails, the aluminum underneath starts oxidizing. Re-coating a section is cheaper than replacing it, but only if you catch it before the metal itself thins.
- Wind noise or rattling panels. Loose channel screws and worn clips let panels rattle during Santa Clarita’s fall Santa Ana winds. It’s a small parts fix now, or a bigger repair when the wind finally pulls a panel free.
Replacement Cost & What’s Included

A Dvele fence replacement in Santa Clarita runs $3,500 – $9,000 installed. The range depends on three things: how many linear feet you’re replacing, whether you need new posts or can reuse the existing footings, and whether the finish needs a custom color match. A typical 40 to 60 foot run with new panels, re-set posts, and hardware lands around $4,500 – $6,000. Full perimeter replacements with gate work and concrete work hit the top of the range.
Every quote includes the panels, posts or channel hardware, fasteners, haul-away of the old fence, and labor. The written price you approve is the number on the invoice. No change orders unless you ask for something different. And every Dvele fence installation carries our 365-Day Done Right Promise: if it’s not done right, we make it right, in writing, for a full year after the job closes.
DIY or Call Us?
If you’re comfortable with a level and a drill, you can re-tighten loose channel screws and replace a sagging gate hinge. Those are 20-minute fixes with parts we’re happy to sell you over the counter or ship. Where DIY goes wrong on Dvele fence systems is post re-setting. The panels are modular, but the posts carry real weight, and a post set out of plumb by even half an inch throws the whole line off. We’ve fixed several homeowner attempts where the concrete was mixed too wet, the post shifted overnight, and the panels behind it cracked when they tried to force them back into the channels. Fence sections under wind load are no joke. If a panel lets go, it’s a 40-pound projectile. For anything beyond tightening hardware, call us.
Call (661) 592-1977 and tell us what you’re seeing. We’ll give you an honest read over the phone and a written price before we touch anything.
How Much Does Dvele Fence Installation Cost in Santa Clarita?
Dvele fence installation in Santa Clarita costs $3,500 – $9,000 for a full replacement. Repairs like panel re-seating or channel clip replacement run $350 – $900.
- Channel clip and screw replacement: $350 – $700
- Single panel replacement: $500 – $1,000
- Post re-set (per post): $400 – $800
- Full fence replacement (40 – 60 linear feet): $4,500 – $6,000
- Full perimeter with gates and concrete work: $7,000 – $9,000
See the difference
Before
After
Before
After
Before
AfterWill the Price Change Once Work Starts?
No. The price we put in writing before work starts is the price you pay, unless you add scope. The only exception is if we find a condition no one could see before opening the wall or the ground, and even then, you approve the change in writing before we proceed. Call (661) 592-1977 for an exact quote on your Dvele fence.
Do You Pull the Permits?
Most Dvele fence replacements in Santa Clarita don’t require a permit if we’re swapping like for like. If your community has an HOA approval process, we’ll handle the paperwork and the drawings. When a permit is required, we pull it, schedule the inspection, and make sure it passes. That’s standard on every Sawyer Remodel Santa Clarita job.
How Long Will the Job Take?
A typical Dvele fence replacement takes 2 to 4 days. Panel re-seating and clip repairs are done in a day. Post re-sets take two days when concrete needs to cure. We tell you the schedule in writing before we start, and we hit it.
FAQs

A Dvele fence system lasts 15 – 20 years in Santa Clarita if the posts are set correctly and the powder coat stays intact. The panels themselves hold up well; it’s the hardware, channels, and post footings that fail first, usually around year 8 to 12. Call (661) 592-1977 and we’ll inspect yours and tell you how much life is left.
Yes, in most cases. Loose panels, worn clips, sagging gates, and corroded channels are repairs, not replacements. We only recommend full replacement when the posts are compromised or the powder coat has failed across enough panels that patchwork looks worse than starting fresh.
We stock the common Dvele-compatible parts: channels, clips, hinge sets, and powder-coat touch-up in the standard Dvele colors. Custom color matches add a few days. Most repairs are done with parts from our truck, same visit.
A full Dvele fence replacement takes 2 to 4 days. Smaller repairs are same-day. We give you the exact schedule in writing before work begins, and you get photo updates before and after, per The Relay Standard.
Written by Luca Romano, Owner, Sawyer Remodel Santa Clarita at Sawyer Remodel Santa Clarita, serving Santa Clarita and nearby areas.


