Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Santa Clarita Owner’s Guide
We stock and install CWS-compatible driveway and paver parts across Santa Clarita, with typical replacement or repair jobs running $250 to $18,000 depending on whether you’re sealing, replacing a section of pavers, or doing a full driveway teardown. Most paver and driveway part swaps we handle in one visit, and we carry common CWS-compatible edge restraints, base panels, joint sand, and replacement pavers on the truck. The call usually starts the same way: a paver has sunk, an edge restraint popped loose, or a section of the driveway shifted after rain and now the joints are spreading.
Sawyer Remodel Santa Clarita is an independent service provider, not affiliated with CWS. We work with CWS products because homeowners in Santa Clarita keep calling us about them, and we learned the product line the hard way: on our knees, pulling failed pavers out of driveways in Valencia and Saugus.
Which CWS Models This Applies To
CWS sells paver and driveway systems under several product lines, and the compatibility issue is real. CWS pavers come in different thicknesses (typically 60mm for pedestrian areas and 80mm for driveways), and the thicker driveway pavers use a different base panel and edge restraint than walkway units. If you’re replacing a paver, match the thickness first. Thinner 60mm units laid on a driveway base will crack under tire load, and we see this happen when someone patches with the wrong series.
The quick way to identify what you have: flip a loose paver and look for the CWS mold stamp on the back. If the stamp is worn off, measure the depth. 80mm is a driveway paver; 60mm is for pedestrian or patio use. For edge restraints and base panels, bring us a photo of the failed section and a measurement of the exposed lip, and we can usually match it from the truck or have it in hand within a day. Aftermarket equivalents exist and we use them when they match the thickness and interlock profile, but for driveway loads we lean OEM because the interlock tolerances matter. A slightly loose aftermarket fit means shifting within a season.
Styles & brands we work with
Signs Your CWS Driveway & Pavers Are Failing
- Pavers sinking in one spot: This is almost always a base panel failure or base material washout underneath. Santa Clarita’s dry summer heat followed by winter rain cycles cause the native soil to expand and contract, and over time the base compacts unevenly. The paver drops because what’s under it stopped holding.
- Edge restraints popping loose or pulling away: CWS edge restraints hold the perimeter tight. When they pop, it’s usually because water found a path underneath and pushed the restraint outward. You’ll see a widening gap between the driveway edge and the top of the restraint.
- Joint sand washing out after rain: In Santa Clarita, drain-off from the hills runs fast. If the joint sand in your CWS pavers disappears after every storm, the joints have widened and the sand can’t set properly. Left alone, pavers start shifting laterally.
- Visible cracks across multiple pavers in a line: A straight-line crack pattern means the base or subgrade under that line is moving. This often happens on driveway aprons where the concrete transition meets the pavers, especially in older Santa Clarita neighborhoods like Canyon Country where the soil shifts seasonally.
- Weeds pushing through joints repeatedly: Weeds mean both joint sand and any fabric barrier have failed. Pulling the weed is temporary. The joint needs sand replaced at minimum, and you may need the paver lifted to check what’s under it.
Replacement Cost & What’s Included
Here’s the honest pricing for Santa Clarita. The numbers below are installed ranges, not parts-only.
- Driveway sealing: $250 to $700
- Paver patio installation: $3,500 to $11,000
- Paver driveway installation: $7,000 to $18,000
- Concrete driveway installation: $4,500 to $12,000
- Asphalt driveway paving: $3,500 to $9,000
- Driveway replacement: $5,000 to $14,000
For a repair rather than a full install, you’re typically looking at $300 to $1,500 when we’re pulling a section, re-setting the base, and re-laying the pavers. What moves that number: section square footage, whether the base material needs to be removed and re-compacted, and whether we’re matching existing pavers you already own versus sourcing new CWS-compatible units. Every quote from us is a written line-item price before work starts. You approve the number, and that’s the number on the invoice. And every repair carries the 365-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Look at the edge restraints and take a photo of any loose section. Pull a sunken paver and check whether the sand underneath is wet, dry, or gone. That tells you whether you’ve got a drainage issue or just a settled base. For joint sand, you can sweep in polymeric sand on a small patio and probably get a decent result.
Where DIY goes wrong on CWS driveways is the re-compaction step. If you lift pavers and don’t re-compact the base properly, you’ll have the same sinkhole within a season. Driveways take vehicle weight, and a hand tamper doesn’t match the plate compactors we use. Also, if your driveway slopes toward your foundation and the base is washing out, the repair isn’t just about the pavers. It’s about the drainage path, and that’s where a professional saves you a second repair bill. If you’re not sure what’s underneath, call us at (661) 592-1977 and we’ll look at it.
FAQs
A properly installed CWS paver driveway in Santa Clarita typically lasts 20 to 30 years, but the joint sand and edge restraints usually need service at the 7 to 10 year mark. The sun bakes the sand dry and the winter rains erode it, so sand replacement is the routine maintenance item you can expect. Call (661) 592-1977 if you want us to inspect what you have before it turns into a bigger repair.
Yes, individual pavers and small sections can be lifted, re-based, and re-laid without replacing the whole driveway, as long as the pavers themselves aren’t cracked through. We do this regularly in Valencia and Stevenson Ranch where a single sunken section is the problem. If the pavers are cracked, we match the closest CWS-compatible replacement and blend it in. Call us for a free estimate and we’ll tell you which route makes sense.
A section repair on a CWS driveway, lifting sunken pavers, fixing the base, and re-laying the units, is usually one day for sections up to about 200 square feet. Full paver driveway replacements in Santa Clarita run three to five days depending on square footage and whether we need to haul out the old base. We’ll give you a written timeline before work starts.
Yes, we keep common CWS-compatible edge restraints, base panels, joint sand, and a selection of 60mm and 80mm replacement pavers on the truck for service calls in Santa Clarita. If your exact mold or color is special-order, we’ll get it in hand before we schedule the repair so you’re not waiting on a half-finished driveway. Call (661) 592-1977 and we’ll confirm what we can pull for your job.
Ready for a Free Estimate?
If your CWS driveway or pavers are failing, start with a free estimate. We’ll put the price in writing before any work starts, so you know exactly what you’re approving. Call (661) 592-1977 and ask for Luca. The work tells the story. We just show up and do it right.
Written by Luca Romano, Owner, Sawyer Remodel Santa Clarita at Sawyer Remodel Santa Clarita, serving Santa Clarita and nearby areas.
